What's New

Latest updates and improvements to LotsBlog

Deleted posts go to Trash first. Deleting a post now moves it to Trash, where you can restore it or delete it forever, so nothing disappears by accident.

Gone from your blog at once: a post in Trash leaves your public blog, sitemap, RSS feed and search straight away, and search engines are told it is gone.

Restore puts it back as it was: a restored post returns to its previous status, whether it was published, scheduled or a draft. A post in Trash can't be edited until you restore it.

Who can do what: editors and authors can move only their own posts to Trash. Only the blog's owner or an admin can delete a post forever, from Trash in the dashboard.

Your AI agent works the same way: deleting moves a post to Trash, and it can restore it.

If you connected Beehiiv or Buttondown to your blog, the Auto-send on publish switch in newsletter settings now does what it says. When you publish a post, LotsBlog creates a draft of that post in your newsletter account, once per post. Nothing goes to your subscribers on its own. You open the draft in Beehiiv or Buttondown, check it, and press send when you are ready. This keeps you in control of what reaches your readers while saving you the copy and paste after every new article. Scheduled posts work the same way: the draft appears when the post goes live. To use it, open your blog, go to newsletter settings, connect your provider and switch on Auto-send on publish. You can switch it off at any time, and posts you already published are not touched.

The home page of your blog dashboard now shows how your blog is doing, not just a list of recent articles. For the last 28 days you see your views, plus Google clicks, impressions and average position, each compared with the 28 days before. A daily chart shows views and Google clicks together, and below it you find your top posts and your top five searches. A Your writing section shows drafts, scheduled posts and recently published posts, and new comments from the last 7 days. The header shows your blog name, its live address and a New post button. If Search Console is not connected yet, you see a card that takes you to the Search tab, so you never see made up zeros. Open your blog dashboard to see it.

You can now hand a whole blog to another LotsBlog account.

How it works: on the Team tab, the owner enters the new owner's email and chooses whether to stay on as an admin, editor or author, or leave. The new owner gets a link, sees what moves, who stays and whether their plan or credits cover the blog, then accepts or declines. Until they accept nothing changes, and the owner can cancel.

What keeps working: your posts stay at the same addresses, so readers and search engines see no change. A blog connected to a LotsBusiness website at /blog keeps working after the move.

When it helps:

  • Handing a finished blog to a client.
  • Moving a blog from a personal account to the company's account.
  • Passing a blog to a new owner when a project changes hands.

AI agents can start and accept transfers too, with transfer_blog and accept_blog_transfer, after the owner confirms.

See how your blog does in Google search without leaving LotsBlog. Analytics now has a Search tab, and your AI agent can read the same numbers over MCP.

  • Clicks, impressions, click-through rate and average position, with a daily chart
  • The searches people found you with, and your top pages by post title
  • Search numbers for each post too
  • Submit your sitemap to Google in one click
  • Up to 16 months of history when you connect a property you already have

Two ways to connect:

  • Already use Search Console? Add LotsBlog's account to your property and click Check connection. You stay the owner and can remove our access any time.
  • Not using it yet? Choose Set it up for me. LotsBlog verifies your blog with Google and submits your sitemap for you.

LotsBlog reads Google once a day, and a newly added property can take a day or two to show data. Disconnect any time and LotsBlog deletes the numbers it stored. https://lots.blog

Linked to task

Invite your team to write and manage your blog with you. Each person gets a role, sees the blog in their own LotsBlog dashboard, and can do only what that role allows. Built for content teams, agencies and brands.

Roles:

  • Admin: manages the team and most settings, and can manage any post
  • Editor and Author: write posts with the access their role allows, and can move only their own posts to Trash
  • Owner: you. Your custom domain and ownership stay with you; ownership can't be given by an invite or a role change.

How invitations work:

  • Invite people by email from the Team tab; the invitation is valid for 7 days
  • They sign in or create an account with the invited address and join with their role
  • Invitations work on private blogs too, and private blogs are invite only: nobody else can sign up to read them
  • Owners manage admins, editors and authors; admins manage editors and authors

Leaving and removing:

  • Anyone except the owner can leave a blog from the Team tab
  • Removed members become readers again, and their posts stay on the blog

Your AI agent can invite, list, change roles and remove members too.

Start at https://lots.blog

Write a long, readable headline for your page and a short title for Google. Each LotsBlog post can have its own search title and meta description, set in the editor or by your AI agent.

What you can set:

  • SEO title: used as the page title in search results and as the title on social shares. The headline on the page stays as you wrote it.
  • Meta description: the short summary search engines can show under your title
  • Blog description: the text search engines show for your blog's home page, also used as its intro

How to use it:

  • In the post editor, fill in SEO Title and Meta Description
  • Or ask your agent: it sets meta_title and meta_description on a post, and description on the blog with update_blog
  • Changes show on your public pages within seconds

Worth knowing:

  • Keep the SEO title to about 60 characters so search results show it whole
  • Leave it empty and the post title is used, as before
  • Keep the blog description to about 155 to 160 characters

Start at https://lots.blog

See your blog's visits in the analytics tools you already use. Paste an ID and LotsBlog adds the official tag for you, with no code to edit. LotsBlog's built-in stats keep working alongside.

What you can add:

  • Google Analytics 4: Settings > Configuration > Google Analytics, paste your Measurement ID (G-...)
  • Google AdSense, Meta Pixel, Plausible, Microsoft Clarity, Fathom and Umami: Settings > General > Integrations, paste the ID
  • Google Tag Manager: on your own custom domain only

How it works:

  • Tags load only on blogs that add an ID; clear the field to remove one
  • The Google Analytics tag loads after the page is ready, so it doesn't slow your posts
  • Visitors in Europe see a consent bar first, and nothing loads until they accept
  • Sign-in and dashboard pages never load these tags
  • Tags work on your lotsblog.com address, your custom domain and a /blog path on your site

For your agent:

  • Your AI agent can set or remove the Google Analytics ID with update_blog (ga_measurement_id)

Start at https://lots.blog

Your blog can now live at a path on your main site, like example.com/blog, as well as on a lots.blog subdomain or your own domain.

Add one rewrite rule on your site, and LotsBlog handles the rest: every link, canonical URL, sitemap, RSS feed, robots.txt, llms.txt, Markdown copy and structured data follows your /blog address, and your old blog address redirects there. Blog settings gives you copy-ready rules for Cloudflare Workers, Vercel, Next.js, Netlify and Nginx, plus a Check button. Your AI agent can set it up too, with connect_domain and a path.

You can see it live at lotscrm.com/blog and lots.link/blog.

Also new:

  • Canonical URL per post: cross-posting an article you first published elsewhere? Set its canonical URL and search engines credit the original. Those posts stay out of your sitemap.
  • Faster indexing: every time you publish, update or unpublish a post, LotsBlog notifies search engines that support IndexNow (such as Bing) right away.

Every LotsBlog blog now gives AI assistants and search engines a clean way to read and cite it, with nothing to set up.

  • llms.txt at your blog's root, listing your articles for AI tools
  • A Markdown copy of every article at /your-article-slug.md
  • RSS at /feed.xml as well as the existing feed
  • Richer structured data: Blog, WebSite and Organization schema on your homepage, CollectionPage on topic pages, and articles that carry the author's name and the real last-edited date
  • Cleaner indexing: topics with no published posts stay out of search results, long titles drop the blog-name suffix, and http addresses redirect to https
  • robots.txt you control: Settings shows the exact file your blog serves, with Reset to default, and your sitemap is always listed. Your agent can read and update it too.

Fixed: article pages no longer show "not found" to readers arriving from Google, X, LinkedIn or other sites.